Spraytecs low and high pressure pipe cleaning and purging nozzles - LA series are the right solution for every need in the vigorous action of cleaning of pipes, tube bundles, heat exchangers, radiators, cavities, small cylinders or tanks, and are available in a wide range of models, suitable for removing both residues with small consistency and fragile surfaces with a delicate action, and calcified and particularly difficult incrustations with a mechanical action that must and can be very intense.
An interesting detail is the availability of professional nozzle models also suitable optionally for use with non-professional pressure washers, therefore with flow rates starting from 6 liters per minute (360 litres/hour).
Spraytecs LA nozzles, for cleaning and purging at high or low pressure pipes, are always accompanied by correct indications to allow your high pressure pump to work in an optimized condition for the manufacturer's characteristics and offer the best operating results.
To obtain the best performance in case of internal cleaning of pipes, it is recommended to use nozzles with a diameter slightly smaller than the internal diameter of the pipe, in order to exploit the energy of the jet at the distance of maximum intensity.
In addition to the nozzle models presented below, in the case of pumps or pressure washers with particular characteristics, different from the compatible models envisaged, we can produce nozzles calibrated exactly to your work equipment.
Send us a request and you will have a quick quotation.
Ducts Cleaning Nozzle Model L1 - LA Series
They are available in various sizes and flow rates, even upon request and calibrated for the available pump.
They are the right solution for those who want reliability and professional performance at an attractive price.
Above is shown one of our Spraytecs L1, from the LA series, a nozzle for cleaning difficult deposits, suitable for solving difficult situations at high and low temperatures, by using high pressure.
The material used is AISI 304 stainless steel and brass, the rostral head is particularly sturdy and is suitable for mounting on a lance or on one end of a sturdy flexible hose for high pressures. It haven't to be used in presence of plastic ducts and plastic pipes, or fragile surfaces because it could damage them due to excess of energy.
Below are the models and performances of the L1 cleaning nozzles of the Spraytecs LA series:
The picture above on the left, shows the spray pattern of these nozzles in case of three orifices.
The picture above on the left, shows the spray pattern of these nozzles in case of four orifices.
Ducts Cleaning Nozzle L2 - LA Series
They can be made in various sizes and capacities and are the right solution in their performance segment for those who want reliability and professional support before and after the purchase, at the right price.
Developed by the request of our customers, they solve difficult cleaning problems in relatively long and small tubes.
Above is shown one of our Spraytecs L2, from the LA series, a cleaning nozzle for difficult encrustations, in small-sized tubes.
It is also suitable for solving difficult situations at high and low temperatures, using high pressure.
The picture above on the left, shows the spray pattern of these nozzles in case of three orifices.
The picture above on the left, shows the spray pattern of these nozzles in case of four orifices.
Ducts Cleaning Nozzle L3 - LA Series
They can be made in various sizes and capacities and are the right solution in their performance segment for those who want reliability and professional support before and after the purchase, at the right price.
Shown above are our Spraytecs L3, LA series, scale cleaning nozzle, suitable for pipes and small tanks with corners or curved surfaces.
Suitable for solving difficult situations at high and low temperatures, with the use of high pressure. They are available for reaction operation, with jets on the feed pipe side, or Front, frontal, to hit the incrustations during advancement (suitable for pipes with open outlet side)
The picture above on the left, shows the spray pattern of these nozzles in case of three orifices.
The picture above on the left, shows the spray pattern of these nozzles in case of four orifices.
Special flow rates on customer's requirement are possible.
Ask for further information by email about your next Spraytecs washing component!
Check with SPRAYTECS for critical dimension, pressure, capacity, fluids in your applications, in order to receive support in your decision.
Nozzle materials must meet correctly chemical composition of fluids in your processes, always remember it.
Spray angle performance varies with pressure. Contact SPRAYTECS for specific data on your critical applications.
